Brijm
Lifetime Supporting Member
Micrologix 1400....
I wanted to see, if anyone has used the Micrologix 1400 and what was your opinion of them. I have a small project, that will involve 3 PID loops from thermocouples, that I will be using for On-Off temp. control... I will also need to use 1 or 2 HSC's, for encoder feedback. There is a little bit of other I/O and display on a G308 HMI, but no other major logic functions.
The 1400 with analog, and a thermocouple module seems perfect, but not using them, I'm a little concerned about bogging down the processor. We us Micrologix 1000's and 1500's a lot, but have never done this type or processing with the smaller AB's.
Any Opinions?
-MUR
I wanted to see, if anyone has used the Micrologix 1400 and what was your opinion of them. I have a small project, that will involve 3 PID loops from thermocouples, that I will be using for On-Off temp. control... I will also need to use 1 or 2 HSC's, for encoder feedback. There is a little bit of other I/O and display on a G308 HMI, but no other major logic functions.
The 1400 with analog, and a thermocouple module seems perfect, but not using them, I'm a little concerned about bogging down the processor. We us Micrologix 1000's and 1500's a lot, but have never done this type or processing with the smaller AB's.
Any Opinions?
-MUR