I digged through different documentation, spent hours trying to accomplish it and still didn't get results Please help!!
I have ControlLogix5550 with DHRIO module (slot 3) and PLC5 (node 11 in Oct) attached to channel B (Node 2) Link 33. I want to use MSG instruction in RSLogix5000 to read I/Os from PLC5. For test I am trying to read N7:0.
Steps I performed:
1. Created tag INBOX with INT[10] datatype
2. In RSLogix did PLC mapping - map file 7 to INBOX
3. Created MESAGECONTROL tag type message
4. Created message instruction . Message control = MESAGECONTROl tag. Message typ = PLC5 TypedREad. Soruce element - N7:0. Number of Elemetns = 10. Destination is INBOX.
5. In Communication specified path to DHRIO. COmmunication Method = DH+, Channel B, Destination Link: 0 Source Link:0 Destination Node = 11.
6. Created XIO specifying MESAGECONTROL.EN
WHen I run a programm it says Enable - Enable Wating - Enable Start but doesn't show Done and nothing gets populated in INBOX - what can be the problem?
Thank you!
I have ControlLogix5550 with DHRIO module (slot 3) and PLC5 (node 11 in Oct) attached to channel B (Node 2) Link 33. I want to use MSG instruction in RSLogix5000 to read I/Os from PLC5. For test I am trying to read N7:0.
Steps I performed:
1. Created tag INBOX with INT[10] datatype
2. In RSLogix did PLC mapping - map file 7 to INBOX
3. Created MESAGECONTROL tag type message
4. Created message instruction . Message control = MESAGECONTROl tag. Message typ = PLC5 TypedREad. Soruce element - N7:0. Number of Elemetns = 10. Destination is INBOX.
5. In Communication specified path to DHRIO. COmmunication Method = DH+, Channel B, Destination Link: 0 Source Link:0 Destination Node = 11.
6. Created XIO specifying MESAGECONTROL.EN
WHen I run a programm it says Enable - Enable Wating - Enable Start but doesn't show Done and nothing gets populated in INBOX - what can be the problem?
Thank you!