krakenfan69
Lifetime Supporting Member
Hi guys. Was hoping someone could help me understand the mapping on an MVI56E module. I have a 1756-L72 processor and am able to read the info from a Profire 2100 but I can't stop remotely and if the unit goes down I can't seem to restart it. I'm struggleing to find the actual mapping of where it is sending the start/stop command to. I can't seem to prove it's sending "4321" to Modbus register 40100 to stop the unit.) I've read through the manual for the MVI card but it's a bit daunting for my first MVI experience. Is there a simple answer as to how to find out where it's sending it?
Thanks for any help,
Kraken Fan #69
Thanks for any help,
Kraken Fan #69