Need help in choosing a right PLC

nvramana406

Member
N
Join Date
Mar 2011
Location
Hyderabad
Posts
5
hello,
i need a PLC for below requirement..
i have 60 blowers mounted in a rack. for my requirement the blowers should be switched to ON/OFF for every 30.4 min. the supply voltage for the blowers is 12V DC. so please suggest the right PLC for this requirement..

need any information ask me at "[email protected]"..
 
Any plc brand will fit this bill. I would choose something that will provide you the best local support. Sounds like you're going to need the help designing/configuring this.
 

Similar Topics

J
Need help on choosing cable to connect rs485 devices to PLC
I am going to daisy chain a couple Modbus devices off of a Click plc using rs 485. There will be three slave devices daisy chained off one another...
2
Replies
16
Views
9,214
danw
danw
N
Need help choosing first PLC
Hello folks, I would like to request your input and opinions to help me choose a PLC make/model for my company. I’m a manufacturing engineer...
2
Replies
18
Views
5,845
natenut
N
N
Need help in choosing a right equipment
Hello all, this is Ramana from Hyderabad, India. i am new member to this forum.. i need your suggestions for my project.. Data is i have 60...
Replies
1
Views
1,562
jstolaruk
J
N
Need help in choosing a right equipment
Hello all, this is Ramana from Hyderabad, India. i am new member to this forum.. i need your suggestions for my project.. Data is i have 60...
Replies
0
Views
1,728
nvramana406
N
N
Need help in choosing a right PLC
hello, i need a PLC for below requirement.. i have 60 blowers mounted in a rack. for my requirement the blowers should be switched to ON/OFF...
Replies
8
Views
2,612
keithkyll
K
Back
Top Bottom