Hello, does anyone have experience setting parameters for High Speed Counting and RPM in the LS Master-K 120 PLC? Do you know a phone number for tech support at LS Systems (a subsidiary of LG, a Korean company that makes cell phones, TVs, Industrial Equipment and PLCs). I have read and re-read the manuals and am still missing something. I have only moderate experience programming PLCs. Thank you.
Need help with LS Master-K 120 PLC
- Thread starter Greg640
- Start date
http://eng.lsis.biz/Greg640 said:
Try this one.
Haven't worked with LG PLCs but looked at GLOFA a while back at clients request.
Similar Topics
I want connect MODBUS RTU device with AB ML1100 PLC to read the holding registers of MODBUS device.
In RSLogix 500 I have already configured the...
hello,recently I have 1 project that use S7-315-2DP & profibus link to MM440 invertr & Simoreg DC master drive,but until now I just can up to the...
Hello all
I need to establish data xfer for following n/w config. plz tell me xact hardware & software config. procedures in STEP7
Three...
I have an old Sentry Palletizer (S/O Number 3007 / Serial Number 1172) that has lost its program as the backup battery died years ago. I can...
So i've been at this for a long while, i have Citect Scada 2018, i have full access to everything but i can't seem to find any option or...