New control enclosure for machine

[Klincker]

So I am new here at my place of work and noticed that some of the veterans on the dayshift side are making an electrical enclosure. I took a look inside and was quite shocked with the way this was done... Should this be completely illegal to install on a plant floor or am I just over reacting. What would you NEMA rate this box also?

 

[Bullzi]

Nothing is attached.

 

[Klincker]

oops

Let me try to add the pics again

 

[Klincker]

Maybe one more time??

I hope it worked with the attachment this time. Says its on there and then doesn't post out to the thread. If it doesn't work this time I guess i'll just have to go to the practice section lol

 

[jkerekes]

Nope..

 

[James Mcquade]

All electrical devices sold / installed must be ul listed for their intended purpose. NEC 70.
Home made enclosures will not pass any inspection in my opinion.
I cannot see the picture either.

james

 

[jraef]

You know that you have to put your images in an image hosting site, right? You can’t post images from your computer.

If you did use a hosting site, it must not be allowing remote calls. Some don’t. Pick another site.

 

[Ronnie Sullivan]

Actually, you can.
Tool straight from my computer

Use 'attach file' pictures are allowed there.

 

[Saffa]

You can certainly attach images directly. They just need to be under 300kb. Maybe try resizing / compressing first.

I'm intrigued to see this image now!