Nusco drive with proface hmi communication

kulmaint

Member
K
Join Date
Dec 2018
Location
AUSTRALIA
Posts
42
DEAR FRNDS i have NUSCO DRIVE MODEL IS NSD-33 NC SERVO DRIVER and PROFACE HMI MODEL is AGP3500-T1-AF 3280035-45.PLZ TELL ME HOW TO COMMUNICATE.THANKS
 
I'm not sure that you can. The Proface is going to want to talk to tags from your *PLC*, something that your drive probably isn't going to have.

Proface will talk Modbus, but I don't think that the Nusco drive will.
 

Similar Topics

B
Indradrive Cs/maCYmosBL (kistler) via sercos communication setup
Hi all, I have a studio 5000 project that incorporates a Rexroth Indradrive Cs servo amplifier, a Kistler Joiner, with a maXYmos measuring/control...
Replies
1
Views
31
dwoodlock
dwoodlock
J
ROthy806X7 drive
Hi had a question about our machine does a couple rotations with the spindle then PLC turns red light SF and 1 particular driver “FRG” light...
Replies
2
Views
87
John Lee
J
T
Help with Veichi AC Servo Drive
Hi guys, I need help with position control using a Veichi AC Servo Drive model SD600A1-T2-2R2. How do I know how many pulses for it to rotary 1...
Replies
2
Views
100
tientran
T
P
Parameter for Drive Restart on Power Restored?
Hello all, I am currently trying to program a PowerFlex 525, version 7.0. We had a power outage recently and when the power was restored, the...
Replies
10
Views
355
plcgrasshopper
P
M
Can not select other drive in Automation License Manager
Im trying to install a Siemens upgrade license using Automation License Manager v6.0. I clicked D: mistakedly, and now I can not find a way to...
Replies
2
Views
103
Michael385
M
Back
Top Bottom