Panel view

fons04

Member
F
Join Date
Nov 2007
Location
Quebec
Posts
69
Hi, this is a simple question for you guys probably, can i fit a Allen Bradley PanelView with an Omron CQM1 CPU21? And if yes, how dealing with software, configuration? Thanks
 
Can you provide the forum with the complete catalog number of your panelview?

The protocol supported by each device will be the key to whether they will work together or not.
 

Similar Topics

E
Panel view 1000 MCB tripping after initial power up
We have a panel view 1000 powered by 230VAC protected by a 16A type 2 MCB. After initial power up of the MCC, the MCB trips and needs to be...
Replies
1
Views
21
James Mcquade
J
S
A-B Panel View Plus 7
We have boiler control system runs on A-B PLC. The interface is A-B Panel View Plus 7, mounted on the local control panel very near the boiler...
Replies
8
Views
225
James Mcquade
J
S
Multiple Panel View 7 on one A-B PLC.
Can I connect two A-B Panel View 7 to a A-B PLC. Same graphics etc. One on the local control panel and the other Panel View 7 in a remote control...
Replies
2
Views
72
James Mcquade
J
T
Panel View Tag issue.
I have a German programed ME program. I want to know what tag in the PLC a latched button turns on. However when I open up the tag properties I...
Replies
14
Views
245
bkottaras
B
H
Upgrade ram and cf card panel view plus
Am asking if we can upgrade sd ram and cf card of panel view plus ab by a normal sd ram and cf card but Allen Bradley to save cost because in ab...
Replies
9
Views
317
heshamtaha
H
Back
Top Bottom