Hi there,
I have a PannelView 600 connected to a PLC5/40 RIO. But they are not communicating.
I have set the PV600 Communication in PannelBuilder32:
Rack Number: 1
Rack Size: 1/4
Starting Group: 0,1
Pass--Trough Enabled: Yes
Last Chasis: Yes
Baud Rate: 57.6K
I have set my PLC5/40 in Rslogix 5:
Channel 2B - Scanner Mode
Rack Number: 1
Rack Size: 1/4
Group: 0
Baud Rate: 57.6K
I have a PannelView 600 connected to a PLC5/40 RIO. But they are not communicating.
I have set the PV600 Communication in PannelBuilder32:
Rack Number: 1
Rack Size: 1/4
Starting Group: 0,1
Pass--Trough Enabled: Yes
Last Chasis: Yes
Baud Rate: 57.6K
I have set my PLC5/40 in Rslogix 5:
Channel 2B - Scanner Mode
Rack Number: 1
Rack Size: 1/4
Group: 0
Baud Rate: 57.6K