PLC Gremlin
Member
I have done several projects over the last couple of years using PV 600's and always seem to run into an issue with the pushbuttons.
The problem is that the operator,(or me), has to press some of the pushbuttons twice to get them to work. It seems to happen on maintained PB's. Could it have something to do with the indicator tags that I've set up. It happened with PV hooked to a 5/04 on a DH+ network. This time it's a PV 600 hooked to a micro 1500 on a DH-485.
This is driving me nuts..
Thanks.
The problem is that the operator,(or me), has to press some of the pushbuttons twice to get them to work. It seems to happen on maintained PB's. Could it have something to do with the indicator tags that I've set up. It happened with PV hooked to a 5/04 on a DH+ network. This time it's a PV 600 hooked to a micro 1500 on a DH-485.
This is driving me nuts..
Thanks.