kevintfa
Member
Good morning all,
I have a couple of problems today, and maybe someone can help me....I have a panelview 550 with ONE RS-232 port that's connected to a slc5/03 plc. i need to upload the panelview application to make some changes to the screen, but i can't seem to estabilish communication. I tried a RS-232 cable thru a point to point connection and it did not work. I bought a 2706-NC13 cable and tried a point to point connection and it didn't work. I tried both cables with RS Linx driver RS-232 and it didn't work. i tried connecting to the plc thru dh-485 port and i could not see the panelview. Does anyone have any ideas? the panelview is a 2711-K5A5 ser. F rev D frn 3.13.
I have a couple of problems today, and maybe someone can help me....I have a panelview 550 with ONE RS-232 port that's connected to a slc5/03 plc. i need to upload the panelview application to make some changes to the screen, but i can't seem to estabilish communication. I tried a RS-232 cable thru a point to point connection and it did not work. I bought a 2706-NC13 cable and tried a point to point connection and it didn't work. I tried both cables with RS Linx driver RS-232 and it didn't work. i tried connecting to the plc thru dh-485 port and i could not see the panelview. Does anyone have any ideas? the panelview is a 2711-K5A5 ser. F rev D frn 3.13.