PF 525 fault tracking

[Kyle.L]

I'm working in Studio 5000 and wanting to track how many times a PF 525 drive is faulting out on a specific fault so I've been looking through the ac drive tags and i don't know which one i should use.

 

[PLC Pie Guy]

I set this up as a data link tag.
Go to module definition, and under the input data you can select which drive tags you want to monitor. The fault 1 code is one of them. You will have to save and download!
This will then be in your drive tags as Drive_Name:I.Fault1Code
Then knowing the value of the fault you wish to track...... You know the rest of the story.

 

[Kyle.L]

i finally found one of the tags i was looking for it was ACDive:I.fault1Code

 

[PLC Pie Guy]

OOPS Post! , reading an old thread and replied by accident! so I Edit - Delete. TKS.

 

[Bullzi]

When I set up my last PF525 I ran out of datalinks so I used message instructions to get the last 3 faults from the drive so I could display them on the HMI. Maybe this will help you.