ScottSparrow
Member
Hi all,
I am currently working on a project to convert three PLC5's to CLX using the Rockwell migration tools.
I was wondering if it were possible to determine the slot addressing used in each of the PLC5 racks (there are 12 racks in total) using photo's and/or the .rsp file?
The site is one of those where it can't be shutdown very easily, so I am trying to avoid having to shutdown the site to check the dip swithes on the chassis or ASB modules
Having read various posts on this forum I am aware that the details listed in the "I/O Configuration" are information/documentaion only and may not reflect the real configuration.
Due to commissioning constraints my plan is to swap out one chassis at a time, so there will be times when the CLX CPU will be controlling both CLX IO and PLC RIO.
I have photographs which I could upload if this is sufficient to determine the slot addressing?
Any help is greatly appreciated.....
P.S I am a long time listener/reader first time poster.
I am currently working on a project to convert three PLC5's to CLX using the Rockwell migration tools.
I was wondering if it were possible to determine the slot addressing used in each of the PLC5 racks (there are 12 racks in total) using photo's and/or the .rsp file?
The site is one of those where it can't be shutdown very easily, so I am trying to avoid having to shutdown the site to check the dip swithes on the chassis or ASB modules
Having read various posts on this forum I am aware that the details listed in the "I/O Configuration" are information/documentaion only and may not reflect the real configuration.
Due to commissioning constraints my plan is to swap out one chassis at a time, so there will be times when the CLX CPU will be controlling both CLX IO and PLC RIO.
I have photographs which I could upload if this is sufficient to determine the slot addressing?
Any help is greatly appreciated.....
P.S I am a long time listener/reader first time poster.