PLCS Ticker

RMA

Member
Join Date
Sep 2004
Location
North of Hamburg, Germany
Posts
2,052
While looking around the site, I discovered the PLCS Ticker and thought it sounded like a good idea.

Anyway, I tried installing it (twice - thinking I may have mistyped something) and both times ended up as shown below.

If I right-click on the title, I get the option to open it up in a window (and that does work - it connects to the site OK), but that's not exactly the point of the exercise. Anybody got any ideas, or could it be something to do with the companies network setup, here at work.

I'm using XP with SP1.

Thanks in advance.

plcs_ticker_800.jpg
 
almost there...

Hi,
Right click on the new toolbar you created and choose to unlock it. Then drag it to the left to expose the ticker text. Then right click again and uncheck the 'show title' option.
Enjoy,
 

Similar Topics

I've been dealin with some intermittent CIP explicit messaging issues. I tried reducing the amount of small MSG instructions and converted them to...
Replies
19
Views
549
I'm at a new job as the sole control engineer and trying to piece together where my predecessor left off. One machine I'm trying to get online...
Replies
2
Views
124
Or there is an alternative to this? I suppose there are many but I've only seen put/get Can you for example set up a new plc and connect it to an...
Replies
5
Views
329
I have a client who periodically experiences network communication issues. Sometimes when I VPN into the site, their SCADA systems will flash comm...
Replies
2
Views
213
Back
Top Bottom