euipfacil
Member
I'm new at this but anyway, I have a 1394 Gmc digital controller set up to cut rubber extrusion. Problem; when the count reaches 1999 it faults the controller and I must restart. If I set it below 1999 everything is fine. I am told that axis zero is set to 1999 max and I need to change that to 3999. My controller is a 1394CSJT05-L series C. I need to know what software to buy to get online so I can change this value, I am told GML commander will work but virtually obsolete. Will RSLOGIX 5000 communicate with this drive?
Thanks for any help I'm lost and in China!
LR
Thanks for any help I'm lost and in China!
LR