NathBarreiros
Member
Hello!
I have a question regarding the HMI in InTouch, almost a month ago I made an HMI and I have not used it again, now I need to make changes, however; making the slightest change on the screen, changes the resolution of the graphics when I see it in Run Time mode, does anyone know why this happens?
This is the visualization I had at the beginning, in online mode.
http://www.plctalk.net/qanda/attachment.php?attachmentid=57472&stc=1&d=1614147546
When I am in edition mode, from there it can already be seen that the graphics are somewhat extended.
http://www.plctalk.net/qanda/attachment.php?attachmentid=57473&stc=1&d=1614147546
Then when making a change in any part of the screen, it ends up resizing the graphics of my screen. This is a headache, changing sizes again and such ....!
http://www.plctalk.net/qanda/attachment.php?attachmentid=57474&stc=1&d=1614147546
Is there any solution to this?
I have a question regarding the HMI in InTouch, almost a month ago I made an HMI and I have not used it again, now I need to make changes, however; making the slightest change on the screen, changes the resolution of the graphics when I see it in Run Time mode, does anyone know why this happens?
This is the visualization I had at the beginning, in online mode.
http://www.plctalk.net/qanda/attachment.php?attachmentid=57472&stc=1&d=1614147546
When I am in edition mode, from there it can already be seen that the graphics are somewhat extended.
http://www.plctalk.net/qanda/attachment.php?attachmentid=57473&stc=1&d=1614147546
Then when making a change in any part of the screen, it ends up resizing the graphics of my screen. This is a headache, changing sizes again and such ....!
http://www.plctalk.net/qanda/attachment.php?attachmentid=57474&stc=1&d=1614147546
Is there any solution to this?