phuz
Member
Looks like I'm experiencing a lot of "firsts" this week. Here's another:
Loaded a program into a PVPlus 1000 (F/W 8) and PLC program into a L36ERM (F/W 30). PVPlus boots up, shows values, etc., but when going into RUN mode, the PVPlus reboots and gets stuck in a boot loop.
Loaded a program into a PVPlus 1000 (F/W 8) and PLC program into a L36ERM (F/W 30). PVPlus boots up, shows values, etc., but when going into RUN mode, the PVPlus reboots and gets stuck in a boot loop.