webos
Member
I was wondering if anyone has had any luck getting a red lion G310 touch screen working with an Eaton MPONI device. I'm able to get the red lion to transmit and receive on the 3 wire system but i'm not able to get any information out of the device. I have the mponi device connected to a MP-3000.
I've setup floating tags going to the address of 404609 and 404719. Both are read only as a #4 holding register word as real.
I've put the watch on a basic page to display the info if any and also added them to the watch list and both are just coming up with dashes as the result.
I've setup floating tags going to the address of 404609 and 404719. Both are read only as a #4 holding register word as real.
I've put the watch on a basic page to display the info if any and also added them to the watch list and both are just coming up with dashes as the result.