I have an Omron CJ2M-CPU34 and a Redlion G308
Trying to establish Ethernet Communications.
In the CJ2, I have the following setings
IP: 198.162.0.100
set up a router table,using configurator, Unit 0, Network 1
In the G3,
IP: 198.162.0.101
I selected the Omron Master Fins Protocol
Dest Network :1
Dest Node:100
Dest Unit 0
Source Network :1
Source Node: 101
Source Unit 0:
I know my cabling and switch works because I have an Omron G9SP on Protocol 2 and its working!
I contacted Redlion, they told me its up to Omron to tell me how to get it to work
I contact Omron and they helped me set up the router table, but eventually they told me that they can't diagnose a Redlion device.
Also noticed on the Router table that Unit O is shown as an Ethernet/IP and Unit 250 is the Built in Ethernet port. I tried both but no luck.
Can anyone help me?
Trying to establish Ethernet Communications.
In the CJ2, I have the following setings
IP: 198.162.0.100
set up a router table,using configurator, Unit 0, Network 1
In the G3,
IP: 198.162.0.101
I selected the Omron Master Fins Protocol
Dest Network :1
Dest Node:100
Dest Unit 0
Source Network :1
Source Node: 101
Source Unit 0:
I know my cabling and switch works because I have an Omron G9SP on Protocol 2 and its working!
I contacted Redlion, they told me its up to Omron to tell me how to get it to work
I contact Omron and they helped me set up the router table, but eventually they told me that they can't diagnose a Redlion device.
Also noticed on the Router table that Unit O is shown as an Ethernet/IP and Unit 250 is the Built in Ethernet port. I tried both but no luck.
Can anyone help me?