kumar satyam
Member
I have a Rs 485 On my PLC (B & R). I have to communicate it to a HMI having a serial port through a Converter . It was running since last 5 years .But nOw commu nication is Fail. HOw can I check RS 485 port and Converter.
Rs 485
- Thread starter kumar satyam
- Start date
Firejo
Member
That’s going to depend on the RS485 converter. Contact the manufacture and see if they have a diagnostics process
Similar Topics
hi to all,
have anyone tried to communicate Schneider PM800 to a ML1400 through rs485?
i am having an issue with it just receiving message...
I'm trying to control a device via MODBUS RTU and the ModbusRtuMasterV2_PcCOM in Twincat 3. I've configured a device with the right com port and...
I'm trying to write a data in Arduino using MODWR function block .I used the code I got from online for both PLC and Arduino. I made the wiring...
Does anyone know of an AOI using the user ASCII protocol select on the L6x controllers that will talk Modbus RTU using RS-485?
Thanks,
Trevor...
Hello, I'm trying to delve a little into rs-485 communications for a couple projects of mine.
Until now I've been using a delta vfd and a delta...