theColonel26
Lifetime Supporting Member
So basically
I want to copy Ladders 10-19 to 20-29, 30-39 etc. All the way up to Lad 180-189 For a total of 18 copies.
LAD 10-19 use Datafiles, B10,N13,F15, I want LAD 20-29 to use B20,N23,F25, then LAD 30-29 would use B30,N33,F35, etc
So it would be a script that does the ladder copy and then replaces the Datafile part of the Address in for all the instructions, in the copies
Does anyone have an example doing something even remotely like this?
I found the Macro Reference manual but I was hoping I didn't have to start from absolute zero.
This isn't just to create the logic the first go around, this would be to update changes too. To keep all of the Logical Units Identical.
There would be several better ways to handle this in RS 5000, but I am stuck stuck with MicroLogix PLCs for this product line. (even better would be codesys but again not my choice)
I want to copy Ladders 10-19 to 20-29, 30-39 etc. All the way up to Lad 180-189 For a total of 18 copies.
LAD 10-19 use Datafiles, B10,N13,F15, I want LAD 20-29 to use B20,N23,F25, then LAD 30-29 would use B30,N33,F35, etc
So it would be a script that does the ladder copy and then replaces the Datafile part of the Address in for all the instructions, in the copies
Does anyone have an example doing something even remotely like this?
I found the Macro Reference manual but I was hoping I didn't have to start from absolute zero.
This isn't just to create the logic the first go around, this would be to update changes too. To keep all of the Logical Units Identical.
There would be several better ways to handle this in RS 5000, but I am stuck stuck with MicroLogix PLCs for this product line. (even better would be codesys but again not my choice)