RSLogix 5000 Multihop MSG Statements

[NuclearOp]

Hello,

I was curious if any one could shed some light on setting up a MSG statement between two PLC's on different networks. I'm trying to read tags on a L84 from a L18ER, the L18ER resides on the network 192.168.31.X and the L84 on 10.1.1.X. I don't see anything similar to RSLogix 500's miltihop tab any help would be greatly appreciated.

Thanks

 

[gclshortt]

http://www.plctalk.net/qanda/showthread.php?t=51059
The above thread may help you out on the MSG breakdown.
You would have to use port forwarding to reach the other network.
https://en.wikipedia.org/wiki/Port_forwarding
Regards,