akosimalakas Member A Join Date Aug 2020 Location Manila Posts 16 Dec 4, 2020 #1 How to fix this error?
Mickey Lifetime Supporting Member Join Date May 2003 Location Palmdale,Ca Posts 10,660 Dec 4, 2020 #2 See link.. Post 9 thru 15 http://www.plctalk.com/qanda/showthread.php?p=696055
parky Member P Join Date Oct 2004 Location Midlands Posts 5,784 Dec 4, 2020 #3 N Variables are integers (16) bit, Floats are either 32 or 64 bit. you need to do the maths in F registers then if required convert to an integer
N Variables are integers (16) bit, Floats are either 32 or 64 bit. you need to do the maths in F registers then if required convert to an integer
drbitboy Lifetime Supporting Member Join Date Dec 2019 Location Rochester, NY Posts 8,161 Dec 4, 2020 #4 this should work
akosimalakas Member OP A Join Date Aug 2020 Location Manila Posts 16 Dec 5, 2020 #5 it works sir. thanks
Saffa Member S Join Date Feb 2012 Location Bay of Plenty Posts 1,468 Dec 5, 2020 #6 Are you trying to scale an analog? If so, use the SCP instruction if your controller supports it. Much easier for others to follow.
Are you trying to scale an analog? If so, use the SCP instruction if your controller supports it. Much easier for others to follow.