s7-400, programing issue.

altafjamadar

Member
A
Join Date
Feb 2010
Location
pune
Posts
29
dear all greatings,
one of my m/c program made in s7 400 is working ok ,but we found a syntex error in FC 2 block due to which only FC2 not go in online mode .if there is a error how program is running?
please guide me.

screen shot.jpg
 

Similar Topics

A
s7-400, programing issue.
s7-400, programing issue. dear all greatings, one of my m/c program made in s7 400 is working ok ,but we found a syntex error in FC 2 block due...
Replies
3
Views
1,826
TurpoUrpo
T
andyvanosdol
Keyence SR-X300 to Micrologix 1400
Hey all, first time poster here. I am wondering if anyone has tried using a Keyence SR-X300 barcode scanner to a Micrologix 1400. Keyence sent...
Replies
0
Views
52
andyvanosdol
andyvanosdol
B
Micro1400 Recipe Dump
I have a micro1400 processor running two routines (transfer compression/compression molding press). Recipe parameters are stored from job to job...
Replies
0
Views
54
Bltz2
B
B
MTP400 Unified Comfort Panel Missing
Is there anyone who can help me regarding this HMI is missing the choices when I make a new Device in TIA. Only 7" Display above are the choices...
Replies
3
Views
83
mk42
M
C
MSG instruction connect failure between ControlLogix5572 and MicroLogix 1400.
I'm using a SLC typed write from the ControlLogix5572 to the MicroLogix 1400, with path: 2, (MicroLogix IP). The ControlLogix equipment has a...
Replies
0
Views
107
Chris3EC
C
Back
Top Bottom