suboliu Member OP S Join Date Oct 2010 Location windsor Posts 266 Nov 29, 2017 #16 L D[AR2 said: I've not used an S7-1200 so assumed I would have to convert types etc. Here's another example after some experimentation: Click to expand... good, thank you very much
L D[AR2 said: I've not used an S7-1200 so assumed I would have to convert types etc. Here's another example after some experimentation: Click to expand... good, thank you very much
boneless Lifetime Supporting Member + Moderator Join Date Feb 2008 Location OKC Posts 1,628 Nov 29, 2017 #17 There are actually two ways of doing that! One in your TAG table (properties -> linear scaling) Other in your IO field in the HMI (General -> Decimal places). I like the second one better, it still allows me to set to a ms resolution.
There are actually two ways of doing that! One in your TAG table (properties -> linear scaling) Other in your IO field in the HMI (General -> Decimal places). I like the second one better, it still allows me to set to a ms resolution.
suboliu Member OP S Join Date Oct 2010 Location windsor Posts 266 Nov 29, 2017 #18 boneless said: There are actually two ways of doing that! One in your TAG table (properties -> linear scaling) Other in your IO field in the HMI (General -> Decimal places). I like the second one better, it still allows me to set to a ms resolution. Click to expand... good idea, Thank you very much!
boneless said: There are actually two ways of doing that! One in your TAG table (properties -> linear scaling) Other in your IO field in the HMI (General -> Decimal places). I like the second one better, it still allows me to set to a ms resolution. Click to expand... good idea, Thank you very much!