signal converter v->mA recommendation
- Thread starter mikas_m
- Start date
Similar Topics
hola buenas tardes
Tengo que comunicar un lector de codigo de barras con un compact logix a traves de un convertidor de señal 232 balluf que va...
I need to go from a powered 4-20mA output (i.e. transmitter supplies voltage) to an Allen Bradley HART input card 1756-IF16H. I cannot set input...
I have an existing machine with an IFM RN6057 encoder (dat sheet attached) fitted.
This encoder has 2 outputs:
- SSI singleturn
- Incremental...
i would like to know if it is possible to convert a 0-10v signal into a -10-10v signal, and how?
tnx...
I am not sure why this is requested, but it was asked.
Currently I have one PLC , with one output to a relay, turning on a field equipment (just...
