SLC 5/04, damaged EPROM

ppetre

Member
Join Date
Sep 2002
Posts
2
Hello ,
I am using in my project SLC5/04,L541 and I did a stupid mistake and I damaged the UVPROM.(I removed it from the socle and put back wrong)
(It is the UVPROM(27C256) which I suppose it keeps the basic system operation or firmware - Not the EEPROM backup memory).
I please you if you have a PROM programmer to make a image-copy of this UVPROM for this version or other version of SLC5/04.
If you get for me this file I will burn into a blank 27C256 memory.
Unfortunately I don't have a spare SLC5/04 to make myself a copy of this PROM.
Thank you all !
 

Similar Topics

Hey guys, Well, the troubleshooting continues for the client who got hit by lightning. New CPU has been installed, and is working! That's the...
Replies
12
Views
3,381
Hello I have a problem with configuration the Flex I/O profibus module. I have a PLC SLC 505, Profibus scaner on PLC Rack [SST-PFB-SLC] -...
Replies
0
Views
44
Howdy everyone, My company has a few machines running on SLC500 based PLC, and everytime it makes a part we count up on the counter which gets...
Replies
10
Views
340
Hello All! I am writing today because I cannot figure this out for the life of me. Another site I am affiliated with keeps having their slc 5/03s...
Replies
31
Views
741
I’m attempting to send a temperature from a SLC-5/02 to an EZiMarquee display. The vendor said to use a MSG instruction to send the data to the...
Replies
1
Views
111
Back
Top Bottom