Hello and thanks in advance for any help you can give.
I have a SLC 5/04 processor and a Panelmate Power Pro 3000. There is an AIC+ Advanced Interface Converter (Cat.No. 1761-NET-AIC) in between the SLC 5/04 and the Panelmate.
SLC serial port was connected to Port 1(RS-232) of AIC+. Panelmate was connected to Port 3(RS-485) of AIC+.
This is the first time that I deal with Panelmate. I have no idea how to download or upload program from the Panelmate. Any suggestion or where can I get the information from? I had tried Cuttler Hammer website but found nothing.
I have the Panelmate Power Pro Configuration software and Transfer Utility. I heard either one of the software can be used to download/upload from the PanelMate. Is it true?
Thanks again for the help.
Best Regards,
Herbert
I have a SLC 5/04 processor and a Panelmate Power Pro 3000. There is an AIC+ Advanced Interface Converter (Cat.No. 1761-NET-AIC) in between the SLC 5/04 and the Panelmate.
SLC serial port was connected to Port 1(RS-232) of AIC+. Panelmate was connected to Port 3(RS-485) of AIC+.
This is the first time that I deal with Panelmate. I have no idea how to download or upload program from the Panelmate. Any suggestion or where can I get the information from? I had tried Cuttler Hammer website but found nothing.
I have the Panelmate Power Pro Configuration software and Transfer Utility. I heard either one of the software can be used to download/upload from the PanelMate. Is it true?
Thanks again for the help.
Best Regards,
Herbert