geniusintraining
Lifetime Supporting Member + Moderator
I have just got a 1746-NI8 (8-channel analog input)
I have 0-5vdc on any one of the channels, tried them all, the dip sw are set to voltage, I thought it may have been the way I wired it but, I changed it and installed a NI4 and it works great...
Also why does it show 16 channels? here is a screen shot or am I just reading this wrong?
any ideas?
I have 0-5vdc on any one of the channels, tried them all, the dip sw are set to voltage, I thought it may have been the way I wired it but, I changed it and installed a NI4 and it works great...
Also why does it show 16 channels? here is a screen shot or am I just reading this wrong?
any ideas?