I have a TI565t which send a report out communication port 1 using the PRINT statement.
In the past we have had a serial to parrallel convertor and a printer hooked to this port.
I would like to be able to connect a laptop to the port and capture the report as it is sent.
The dip switches on the PLC are set to 300 baud and Xon/Xoff disabled.
What are the remaining communication protocol settings for this port (parity, stop bits, ect). I can not seem to get anything on the plc.
1. I am using a Null modem
2 the "Black Box" serial to parrallel converter is set to 300 7 E.
Does any one have a refference for the communications ports on this PLC?
In the past we have had a serial to parrallel convertor and a printer hooked to this port.
I would like to be able to connect a laptop to the port and capture the report as it is sent.
The dip switches on the PLC are set to 300 baud and Xon/Xoff disabled.
What are the remaining communication protocol settings for this port (parity, stop bits, ect). I can not seem to get anything on the plc.
1. I am using a Null modem
2 the "Black Box" serial to parrallel converter is set to 300 7 E.
Does any one have a refference for the communications ports on this PLC?