MHamza1998
Member
I have a problem with time sync working in this topology.
I have a plc with grandmaster clock controlling motion groups. I wanted to add kinetix 350 to the local network of the seconed plc.
I enabled the time synchronization in the seconed processor but it sees the first one as the grandmaster and i can not control the drive .. after removing the ethernet cable from the first plc the drive worked well. But i still need the connection of the first plc to the network.
ANY HELP ?!
I have a plc with grandmaster clock controlling motion groups. I wanted to add kinetix 350 to the local network of the seconed plc.
I enabled the time synchronization in the seconed processor but it sees the first one as the grandmaster and i can not control the drive .. after removing the ethernet cable from the first plc the drive worked well. But i still need the connection of the first plc to the network.
ANY HELP ?!