I have purchased a Siemens MP377 Panel and a CPU 314 with a couple of racks with modules.
My previous experience with panels is only a TP177 connected to a S7200.
I trying to transfer from WinCC flex to MP377 with a USB cabel, but cannot establish any connection.
Anyone else experienced this problem?
Regards Egil
My previous experience with panels is only a TP177 connected to a S7200.
I trying to transfer from WinCC flex to MP377 with a USB cabel, but cannot establish any connection.
Anyone else experienced this problem?
Regards Egil
Last edited: