Hi
Completely new to Siemens PLCs, so please bear with me.
I have a machine that had an upgrade from s5 to s7 about 7 years ago.
We dont have any Siemens software and didnt have the code from the PLC until today. I have managed to track down the contractor who did the upgrade and he has sent the project over.
I have downloaded a trial version of TIA 15 and tried to migrate the project. When I try to do this it comes up with the following error "There is no suitable STEP 7 version installed. Please install latest STEP 7 version."
Even though the following is installed
SIMATIC Products
Name;Version;Release
"Automation License Manager";"V6.0";"06.00.00.00_01.22.00.08"
"SIMATIC ProSave";"V15.0";"V15.00.00.00_26.01.00.01"
"SIMATIC STEP 7 Professional - WinCC Advanced";"V15.0";"V15.00.00.00_26.01.00.01"
"SIMATIC WinCC Runtime Advanced Simulation";"V15.0";"V15.00.00.00_26.01.00.01"
"TIA Administrator";"V1.0";"V01.00.00.00_01.00.00.01"
"TIA Portal Multiuser Server";"V15.0";"V15.00.00.00_26.01.00.01"
"User Management Component x64";"V1.9";"V01.09.00.00_04.12.00.03"
Any ideas what I am doing wrong?
Completely new to Siemens PLCs, so please bear with me.
I have a machine that had an upgrade from s5 to s7 about 7 years ago.
We dont have any Siemens software and didnt have the code from the PLC until today. I have managed to track down the contractor who did the upgrade and he has sent the project over.
I have downloaded a trial version of TIA 15 and tried to migrate the project. When I try to do this it comes up with the following error "There is no suitable STEP 7 version installed. Please install latest STEP 7 version."
Even though the following is installed
SIMATIC Products
Name;Version;Release
"Automation License Manager";"V6.0";"06.00.00.00_01.22.00.08"
"SIMATIC ProSave";"V15.0";"V15.00.00.00_26.01.00.01"
"SIMATIC STEP 7 Professional - WinCC Advanced";"V15.0";"V15.00.00.00_26.01.00.01"
"SIMATIC WinCC Runtime Advanced Simulation";"V15.0";"V15.00.00.00_26.01.00.01"
"TIA Administrator";"V1.0";"V01.00.00.00_01.00.00.01"
"TIA Portal Multiuser Server";"V15.0";"V15.00.00.00_26.01.00.01"
"User Management Component x64";"V1.9";"V01.09.00.00_04.12.00.03"
Any ideas what I am doing wrong?