Thanks, Dave, for showing great valor in the line of fire (language difficulties).
i did a simple lamp n switch program for the touchscreen. However the lamp still does not appear and it seems tat i cant switch base screen too. May i know whats wrong with that?
Yes, it appears that the button and the lamp both have addresses of "Y1030". That will not work very well. Assign the button and lamp to some other type of address, "M" is best for a touch screen. Make sure that the lamp does not have the same "M" address as your button.
Oops, you beat me to it...you can address the button and the lamp as the same address. This way to test you press the button and the lamp should come on.Yes, it appears that the button and the lamp both have addresses of "Y1030". That will not work very well. Assign the button and lamp to some other type of address, "M" is best for a touch screen. Make sure that the lamp does not have the same "M" address as your button.