djbillyd007
Member
I am doing a PLC controlled model railroad. I have made a website to highlight this. A few of you have shown interest. here is the link. www.bbtrailroad.com I am using a automation direct 305 10 slot base connected to a 5 slot base. This is all tied to a DP-c320 touch screen. I am controlling speed of trains, switch positions, and general building lighting at this point. I have also custom built the throttles. They are basically a variable power supply connected to a relay output, using 4 outputs, tying up to 4 resistors in parallel to vary the speed. look the site over and give me all the advice you can,right now all I have is a few tracks and alot of controls lol, thanks in advance.