PhilipW
Member
Hi...I've just been tossed unwarmed into a Wonderware job that has to be done more or less by the end of next week. Can anyone point me to a "Wonderware for Dummies" tutorial or "Getting Results Quickly" guide that I can get my head into ASAP.
Many thanks
PS The PLC is Schneider TSX Premium with Ethernet.
The setup is:
Wonderware HMI
TSX Premium Master PLC with Six Slave TSX Premium PLC's networked on Wireless Ethernet.
Programming tool is the new Modicon/Schneider "Unity".
VSD Drives are on CANOpen, but I'm the guinea pig for the the drive vendor who hasn't done this before.
And it HAS to be going by the 19th or they are threatening "liquidated damages". (This after the engineering contractors have delayed installation by 3 months!) Does this give anyone else warm fuzzies?
PSS: No this was not the system I quoted on 9 months ago, yes we won the bid, but subsequently the "consultant" unilaterally changed the spec at the end-user's request; buys the hardware and dumps it on us.(And cutting out our margin). If I back out I leave one of my best clients in a hole. Just venting ..Sighs.
Many thanks
PS The PLC is Schneider TSX Premium with Ethernet.
The setup is:
Wonderware HMI
TSX Premium Master PLC with Six Slave TSX Premium PLC's networked on Wireless Ethernet.
Programming tool is the new Modicon/Schneider "Unity".
VSD Drives are on CANOpen, but I'm the guinea pig for the the drive vendor who hasn't done this before.
And it HAS to be going by the 19th or they are threatening "liquidated damages". (This after the engineering contractors have delayed installation by 3 months!) Does this give anyone else warm fuzzies?
PSS: No this was not the system I quoted on 9 months ago, yes we won the bid, but subsequently the "consultant" unilaterally changed the spec at the end-user's request; buys the hardware and dumps it on us.(And cutting out our margin). If I back out I leave one of my best clients in a hole. Just venting ..Sighs.