Hello, I would like to do a continous rotation of an object when a bit is true (1).
I am using Wonderware Windowmaker 9.0.
So far, I set the objects Miscellaneous/Orientation. Set the bit(tagname tied to it). Then set the Value at Max CCW at 0, the Value at MaxCW at 10, the CCW Rotation at 0, the CW Rotation at 360. The Centerof Rotationoffset from object centerpoint: X position = 0....and the Y position=0.
I added a button to test, but what happpens is the test object will only rotate when the bit is toggled back and forth, it will not continously rotate when the bit is true...any thoughts here...
thanks
I am using Wonderware Windowmaker 9.0.
So far, I set the objects Miscellaneous/Orientation. Set the bit(tagname tied to it). Then set the Value at Max CCW at 0, the Value at MaxCW at 10, the CCW Rotation at 0, the CW Rotation at 360. The Centerof Rotationoffset from object centerpoint: X position = 0....and the Y position=0.
I added a button to test, but what happpens is the test object will only rotate when the bit is toggled back and forth, it will not continously rotate when the bit is true...any thoughts here...
thanks