Hello
i have PLC from LS XBCDR40SU , I used it for press brake , as i used rotary incoder to define the positions .
now , if i put two measuring points as for example : 20 mm , 30 mm
the first time is : 20 mm , 30 mm
second time is : 21 mm , 31 mm !!!!!!!
third time is : 22 mm , 32 mm !!!!!!
and so on uncrease one mm for each bend , why ?? and how can i solve it ??
thanks
i have PLC from LS XBCDR40SU , I used it for press brake , as i used rotary incoder to define the positions .
now , if i put two measuring points as for example : 20 mm , 30 mm
the first time is : 20 mm , 30 mm
second time is : 21 mm , 31 mm !!!!!!!
third time is : 22 mm , 32 mm !!!!!!
and so on uncrease one mm for each bend , why ?? and how can i solve it ??
thanks