NiCeBoY
Member
Hi,
I am using a Siemens CPU 314IFM with
DI4xDC24V | AI4/AO1x12Bit module.
I want to know the position of a motor by coupling a 10k Ohm resistor with it.
The system is already setup like that.
It a manual valve connected to a small DC motor coupled with a Variable resistor.
I need to determine if the valve is open or close by reading the value of the resistance of the potentiometer.
Anyone can help me how to wire the potentiometer with the PLC and configure?
Below are some images of the plc I/O and the valve/motor/potentiometer setup.
PLC I/O
Valve
Valve
Thanks
I am using a Siemens CPU 314IFM with
DI4xDC24V | AI4/AO1x12Bit module.
I want to know the position of a motor by coupling a 10k Ohm resistor with it.
The system is already setup like that.
It a manual valve connected to a small DC motor coupled with a Variable resistor.
I need to determine if the valve is open or close by reading the value of the resistance of the potentiometer.
Anyone can help me how to wire the potentiometer with the PLC and configure?
Below are some images of the plc I/O and the valve/motor/potentiometer setup.
PLC I/O
Valve
Valve
Thanks