Hi guys its my first time here so im not to sure how this works. But anyway, my goal is to keep the same speed i got for my conveyor belt.
Right now i got a 10 HP motor at 1750 rpm. with a gearbox ratio of 25/03.
The sproket on the gearbox has 29 teeth and approx 12.5 inch diameter. The sproket on the conveyor Drum has 21 teeth and approx 9 inch diameter. Because this 10 HP will not be strong enaugh for the way we are going to run the conveyor in the futur i got a 20HP at 1750rpm with a gearbox of 32.05. So here is my question what size sprocket will i need to run the same conveyor at the same speed but whit this new gearbox.
The Drum on the conveyor is approximately 11 inch. If my tachometer is good it seems to be traveling at 55 RPM.
Right now i got a 10 HP motor at 1750 rpm. with a gearbox ratio of 25/03.
The sproket on the gearbox has 29 teeth and approx 12.5 inch diameter. The sproket on the conveyor Drum has 21 teeth and approx 9 inch diameter. Because this 10 HP will not be strong enaugh for the way we are going to run the conveyor in the futur i got a 20HP at 1750rpm with a gearbox of 32.05. So here is my question what size sprocket will i need to run the same conveyor at the same speed but whit this new gearbox.
The Drum on the conveyor is approximately 11 inch. If my tachometer is good it seems to be traveling at 55 RPM.