Hi ,
we try to get a CPU 317T-2 D back to life,memory card was defective and with some resets we have only sf light red flickering
we tried to load 3176TK13_V265.EXE ( 4014 KB ) with simatic manager v5.2 on a field pg .
with following instructions ( below)
we deleted the new 8mb card and clicked Update Operating System
select file CPU_HD.UPD
after this we get
eprom an error occurred writing to the memory card!
any idea what is going wrong . second card now and card is ok
Requirements for creating an operating system update card:
Micro Memory Card with at least 8 MB of capacity;
order number 6ES7 953-8LP20-0AA0
STEP 7 V5.1 SP2 or higher
PC with external prommer (order number 6ES7 792-0AA00-0XA0) or Field PG for programming the memory card
Creating the operating system update card via STEP 7:
Download of the desired CPU file
Unpack the file by double-clicking on the file name
Delete the Micro Memory Card by means of "File / S7 Memory Card / Delete" in the SIMATIC Manager
Program the operating system by selecting "PLC / Update Operating System" in the SIMATIC Manager, select the target folder and start the programming process by opening the file CPU_HD.UPD
The operating system update card has been programmed, if the message "The firmware update for the module with the order number 6ES7317-6TK13-0AB0 was successfully transferred to the S7 memory card" appears on the screen.
we try to get a CPU 317T-2 D back to life,memory card was defective and with some resets we have only sf light red flickering
we tried to load 3176TK13_V265.EXE ( 4014 KB ) with simatic manager v5.2 on a field pg .
with following instructions ( below)
we deleted the new 8mb card and clicked Update Operating System
select file CPU_HD.UPD
after this we get
eprom an error occurred writing to the memory card!
any idea what is going wrong . second card now and card is ok
Requirements for creating an operating system update card:
Micro Memory Card with at least 8 MB of capacity;
order number 6ES7 953-8LP20-0AA0
STEP 7 V5.1 SP2 or higher
PC with external prommer (order number 6ES7 792-0AA00-0XA0) or Field PG for programming the memory card
Creating the operating system update card via STEP 7:
Download of the desired CPU file
Unpack the file by double-clicking on the file name
Delete the Micro Memory Card by means of "File / S7 Memory Card / Delete" in the SIMATIC Manager
Program the operating system by selecting "PLC / Update Operating System" in the SIMATIC Manager, select the target folder and start the programming process by opening the file CPU_HD.UPD
The operating system update card has been programmed, if the message "The firmware update for the module with the order number 6ES7317-6TK13-0AB0 was successfully transferred to the S7 memory card" appears on the screen.