JBooth
Member
Hi all,
My plant is currently starting an hvac upgrade form our old siemens control package to a carrier BACnet package. We are using BACnet udp/ip going into a crimson redlion g310 and from there to a CompactLogix PAC, using the redlion as a protocol converter. I have figured out how to get all of the devices hooked up and draw in analog I/O and analog values, but I am having trouble figuring out how to set up the blocks and/or tags to pull in and view or use the binary objects. Any help on how to set up binary BACnet tags to view on the redlion will be much appreciated. For example, one of the binary outputs from the VAV zone fan terminal box is for the fan being on/off. Just want to set up a tag so I can view the state of the fan, or use the state on a fan animation.
Thank you for any help,
James Booth
My plant is currently starting an hvac upgrade form our old siemens control package to a carrier BACnet package. We are using BACnet udp/ip going into a crimson redlion g310 and from there to a CompactLogix PAC, using the redlion as a protocol converter. I have figured out how to get all of the devices hooked up and draw in analog I/O and analog values, but I am having trouble figuring out how to set up the blocks and/or tags to pull in and view or use the binary objects. Any help on how to set up binary BACnet tags to view on the redlion will be much appreciated. For example, one of the binary outputs from the VAV zone fan terminal box is for the fan being on/off. Just want to set up a tag so I can view the state of the fan, or use the state on a fan animation.
Thank you for any help,
James Booth