Had an accident with my 1747-UIC where the usb cable has been ripped out of the device! The cable passes through a clamp and is soldered to 'JP3'. Anyone care to open a UIC and show me which cable core (4x sheild) connects to JP3? There appears to be no other damage!
1747-uic
- Thread starter stix
- Start date
Similar Topics
se me desprendieron los cables del cable usb quiero soldarlos pero no se como van los cables si alquien me pudiera proporcionar una foto o como...
Hi again, so this new client has a SLC 5/02 with a DH485 port. I have the older white 1747-UIC adaptor, which I have only ever used for the RS232...
Hi Everybody!
Has anybody ever tried using the 1747-UIC (USB to DH-485) converter as a straight USB to RS-485 converter?
Since it present to the...
Hello
I will make it short and sweet. I need the cable that goes from the slc 501 to the 1747-UIC RJ-45 connection. From what I can find it...
Hey all, first time posting. I have gotten a lot of great info from all of you in the past. I have searched the forums and google as much as...