connection

medensat

Member
M
Join Date
Jul 2015
Location
CASABLANCA
Posts
19
Hello,

i work on a project and i need some informations about the procedure to connect a siemens 300 with a SIMODRIVE611 converter via the profibus module as well as the creation of two axis in SIMATIC MANAGER STEP7.
Best regards.
 

Similar Topics

A
Omron cj1m ETN cpu11 connection with NT631C
Hi dear . I have a system with cj1m cpu11 etn. previously NT 5z HMI was connected with plc. recently my old HMI got damaged. I want to replace it...
Replies
12
Views
246
IO_Rack
IO_Rack
S
Modbus TCP connection between my plc and a power meter on TIA Portal
Hello gentlemen, Im working on a small project on TIA Portal, about establishing a Modbus TCP connection between my ET200SP plc and a socomec...
Replies
12
Views
305
joseph_e2
J
afm
Ethernet Dongles for PC-to-PLC connection?
Hi all, My ethernet port on my laptop recently broke and I was hoping to just use a usb-c dongle in the mean time to go live on my PLC until I...
Replies
14
Views
453
JesperMP
JesperMP
J
FactoryTalk Linx server connection has an 'abnormal status'
Not a PLC question but I need expert help on this. My FactoryTalk stopped communicating with the server its hosted on. I had an error stating...
Replies
0
Views
106
jbazely
J
B
Studio 5000 - Time Sync Grandmaster Priority - Control Sync and Module Connection Faults
I have to start out by saying I am not a PLC programmer and I have basic programming skills but mainly use software as a troubleshooting tool. I...
Replies
0
Views
127
Bobcat22
B
Back
Top Bottom