Fatal error - driver 1747-PIC

Hello everyone,

I received a Fatal error message when added driver 1747-PIC, after that I closed that window and driver was added normally, but the driver is stopped and buttons "start-up","start" and "stop" are grey.

(Before add the drivers I have unchecked the box "Always run as service mode" at RS Linx Classic Launch Control)

Appreciate a help...

Version of Linx and version of Windows please. Include service pack.

Tks for the prompt reply...

Linx Version: Classic 2.58.00
Windows XP Professional Version 5.1.2600 SP3 Build 2600
I need to connect with PLC 1764 - LRP
As I saw in program, the driver configured was AB_PIC-1

andresantello27 said:

Tks for the prompt reply...

Linx Version: Classic 2.58.00
Windows XP Professional Version 5.1.2600 SP3 Build 2600
I need to connect with PLC 1764 - LRP
As I saw in program, the driver configured was AB_PIC-1

Click to expand...

One possible problem, see link

http://www.plctalk.net/qanda/showthread.php?t=63919&highlight=sp3+patch

Another is, does your PC have a real serial port? That driver will not work without one.

You can also use the "Communications Toggle Push Button" to set channel 0 to its default (DF1 protocol, then use the DF1 driver with a null-modem cable). see pdf below page 4-1 and 4-2 for more info

http://literature.rockwellautomation.com/idc/groups/literature/documents/um/1764-um001_-en-p.pdf