I'm working on a SLC5/04 for flow monitoring process which consists of a few flow transmitter (coriolis meter).
Everyday the operator will do proving (to run 2 transmitters in series to check their accuracy) anytime they wish on the transmitters.
At the end of proving a presentable proving report will be generated to shows how accurate the transmitters are. (Compare the reading between transmitter 1 & 2...etc).
This report has to be print out. Besides that, these reports has to be saved as backup for at least 3 months in the computer (RSView32).
What is the most suitable way to do it. I'm not good in VB
Everyday the operator will do proving (to run 2 transmitters in series to check their accuracy) anytime they wish on the transmitters.
At the end of proving a presentable proving report will be generated to shows how accurate the transmitters are. (Compare the reading between transmitter 1 & 2...etc).
This report has to be print out. Besides that, these reports has to be saved as backup for at least 3 months in the computer (RSView32).
What is the most suitable way to do it. I'm not good in VB