PDOH
Member
Is anyone familiar with the procedure to setup/install the port in lm90 for communication between computer and plc?
Lm90 Port Setup
- Thread starter PDOH
- Start date
If the PLC has not been changed you will not need to setup anything as the hardware and software defaults are equal.
If you are having problems, please be more specific.
Do you have the correct cable?
Do you have a serial port that DOS can use?
What CPU model do you have?
What version is the CPU and LM90?
If you are having problems, please be more specific.
Do you have the correct cable?
Do you have a serial port that DOS can use?
What CPU model do you have?
What version is the CPU and LM90?
Similar Topics
HI guys
I have problem related to other thread which discuss many times.
Serial port.
I have new laptop with out serial port.I try to connect...
I had install the LM90 Serial Software for GE Fanuc 9030 PLC on Windows 98 O.S. My IBM laptop do not have serial port com, It has USB port only...
Converting a 90-70 LM90 to PME 9.5 and need some help with the migration errors and conflicts in the feed back zone.
I have parameterized blocks...
Having specific issues with migrating a 90-70 PLC from LM90 to PME 9.5.
Backing up the LM90 Folder importing into PME is fine however I do not...
We have a customer that has 6 machines running GE Series 90-30 PLCs. In order to support them, they bought a used Dell Full size desktop PC with...