Pc & Plc Networking

UK Homer

Member
Join Date
Jun 2002
Location
Sheffield UK
Posts
13
Hi people I am at the moment trying invain to learn about networking mostly with PC's to start with but later PC's to PLC's and as you have all been so helpful to me in the past I was just wondering if anyone could recommend a good book or books on the subject or even better a good website with simialer forum to this

I appologize for my spellings and been slightly off topic but you never know where you might find the best answers
🔨
 
I haven't read any books on the subject, so I can't recommend one. Most of what I have needed to know about it I learned on my own. Is there some specific things you are having trouble with that you need help with? If so post your problems.

I did a search on google for "Ethernet" and got a lot of hits.

This site looked like it had pretty good information.

http://www.ethermanage.com/ethernet/ethernet.html
 
Try this site:

http://www.brainbuzz.com/

I've used their study guides before as a refresher and as I remember they seem to provide the basics. They even have a practice quiz to prepare for the microsoft/cisco/comptia tests.

I don't know if they have a discussion board.

grs
 

Similar Topics

I have a question about IP addressing and Networking. I have a PLC with following IP address 10.1.0.120 this is an static PLC PLC is working like...
Replies
15
Views
2,128
Hello all. I have a system with 4 different machines, each has their own PLC. I also have a RC in this subnet also. I created a server PLC that...
Replies
0
Views
473
Hello All, I have two CompactLogix that I would like to network together however, they have different IP subnets. Is there a way to connect them...
Replies
15
Views
4,485
Hello All. I need to network two CompactLogix on different subnets. One is 192.168.1.22 and the other is 10.10.30.15. Since I have to bring a...
Replies
4
Views
1,818
Hi Every one I want to hookup the 10 numbers S7 300 PLC CPU on MPI Network . CPU,s are running on 10 different machines with 12 " HMI on each on...
Replies
5
Views
2,137
Back
Top Bottom