Omron 3G3MV Inverter Parameter setting for pulse train

baba1511

Member
B
Join Date
Apr 2005
Posts
19
Hello all

Please who can give me the n01 to n179 parameter setting for sysdrive 3G3MV Inverter to run in pulse train control. All contribution are welcome.
 
You set N004 to parameter 5 to enable the pulse train control terminal. Terminal RP is the signal input referenced to FC the common.

Parameter N149 is the scaling control for the pulse frequency.
 
Thanks I tried but it never work, I still need more help but I will check if there is open circuit.

Regards
 

Similar Topics

A
omron 3g3mv inverter
please i need a help,i have an ac motor conveyor replaced,which is controlled by omron 3g3mv inverter.how can i change the frequency of this...
Replies
2
Views
1,674
osmanmom
O
R
Omron 3G3MV Inverter - PC Comms
Hi, I need to pull the settings from an omron 3G3MV inverter using cx drive. I've ordered the relevant cable but does anyone know the pin outs. I...
2
Replies
18
Views
7,406
atulegwu
A
mordred
PLC to VFD speed control Omron 3G3mv
currently operating machine that is currently using a CJ1m-CPU22 this sends an analog output to FR-FC inputs on the drive then links the next...
Replies
2
Views
6,449
mordred
mordred
R
Omron device net fault
Good morning everyone I’m currently working on a omron device net and have a nord drive that fell off the network. I have limit knowledge in...
Replies
2
Views
97
alan_505
A
M
Omron plc backwards compatibility
I've come across a system running omeron cx-programmer version 9.42. Am I going to need to find a legacy version of the software to edit and...
Replies
1
Views
85
IO_Rack
IO_Rack
Back
Top Bottom