ERROR in PLC OMRON

sronggot · Mar 5, 2007

Dear,

Anyone know how to solve error in PLC OMRON. I Use omron CPM2A and there are error 009B in message error and error lamp always lits..

thanks a lots

best regard,

didi

Paulus · Mar 5, 2007

Hello Sronggot,

This indicates an error in the PLC setup.
Check AR13.00 - AR13.02
AR13.00 ON - Error in settings in DM660 - 6614.
AR13.01 ON - Error in settings in DM6615 - 6644
AR13.02 ON - Error in settings in DM6645 - 6655

Hope this helps

sronggot · Mar 5, 2007

Paulus said:
Hello Sronggot,

This indicates an error in the PLC setup.
Check AR13.00 - AR13.02
AR13.00 ON - Error in settings in DM660 - 6614.
AR13.01 ON - Error in settings in DM6615 - 6644
AR13.02 ON - Error in settings in DM6645 - 6655

Hope this helps

thanks Paulus,

I will try

best regard,

didi

sronggot · Mar 7, 2007

Dear Paulus,

I already opened the memory area PLC and transfer data memroy from PLC and i found in AR10.13, there is value 0001.

And in DM 6600 324D 202A 0020 and i already changed in 0000, but why i cannot transfer to PLC again.

best regard,

didi

Paulus · Mar 9, 2007

sronggot said:
And in DM 6600 324D 202A 0020 and i already changed in 0000, but why i cannot transfer to PLC again.

Hello didi,
Is the PLC in RUN mode?
Switch to MONITOR mode, and download should be possible.

Hope this helps

sronggot · Mar 12, 2007

Hello Paulus,

Yes PLC in RUN mode and I already can download from plc to computer, but i can upload from Computer to PLC. I use CX-programmer software.

Thanks for your advice.

best regard,

didi

cch · Jul 11, 2011

Hello Guys,

How about Omron PLC CP1L?
I also got an error of 009B (PLC Setup Error),
error flag A402.10 is ON and error information address A406.08 is ON.
Does anyone knows what is the meaning for A406.08 is ON?
Thanks

ERROR in PLC OMRON

sronggot

Member

Paulus

Member

sronggot

Member

sronggot

Member

Paulus

Member

sronggot

Member

cch

Member

Similar Topics